Ogallala,NE | white caddy - 4/14/2019 10:24
In SMS you can make a display setup file, complete with field names, boundaries, and I think you can put guidance lines in there too. The trick to know what lines you use and what year they were imported into SMS. Takes a little bit to sift through the years if you have a lot of data. I'm not sure how to change Trimble lines over to insight lines. I've exported lines from insight to fm1000 but not The other way.
I tried this. All my fields and boundaries show up, but it leaves the guidance lines on the card and you have to go to guidance->import and import them one at a time while sorting them into the correct field. |