These are the connectors on a peterbilt 389 at the hood hinge point going to head lights and turn signals. Dealership has not been very helpful in sourcing the ends and pins. So I thought I would ask here. I am looking to create or make a short loom or where I can t into the running lights and turn signal, not t into factory harness, and still have weather tight connectors.
If I have corrosion in my run of loom I would still be able to unplug my section of loom and plug factory connectors back together and have factory turn signals. Will have the truck for a long time and every time I have taped into wiring on a truck I have always had corrosion at some point where wire was exposed.