|
| I have a PF 3000 serial controlling a Rawson Accu-Plant on a variable rate ferilizer cart. When I had the PF set to manually control the Rawson I had the PF at 160 lb/acre. Once we started moving, the Rawson controller shows pretty close, but not the exact rate that the PF is telling it, something like 148-152 lb/acre, but the "Actual Rate" on the PF 3000 shows 14.8 lb/acre. I thought I could change the Actual Rate Scale factor in the PF 3000 to 10 instead of 1, but it only lets me set that number to 1, 0.1, 0.01, 0.001. My problem is that now my As-applied maps are showing a range of 14.5-15.0 lbs per acre instead of 145-150. I'm not really worried about the target rate in the PF and the target rate in the Rawson being off a little bit, but if anybody knows how I can adjust that too, I would appreciate it.
Thanks in advance. | |
|
PF 3000 and AccuPlant
