|
IA | Do you have an incab module with the switches below the monitor and a rowflow module on the planter? You will need both, the rowflow is what the clutch harnesses hook into on the planter frame and can also be used for running hyd drive I believe. I tried hooking the half width clutches on our 3600 to the rowflow in the shop last winter and I don’t think it had enough amperage to actually trigger them so I’m assuming that’s what the relays would be used for the poster above has for sale. Don’t know why you couldn’t leave the original wires hooked up and run them that way if you want and let the 20/20 control them otherwise | |
|