|
West Central Indiana | When I bought my 3800 used the previous owners were using the standard kpm II or III for seed monitoring. They had a Deere 2600/deere receiver/deere rate controller running the 4 section shut off. But it was wired so they could still manually use the 4 toggle switches on your fold box....i thing! They had the wires for this tied into the front right side of the planter directly behind the 2-pt arms and below the big hydraulic block that is on top. You'll see a bank of wires there with little philips head screws. I would think if a Precision dealer could lay eyes on this spot he could mount the rowflow right there on the planter and tie into those wires in that spot.
But I've been wrong before!!!
Edited by CMCC 2/3/2019 11:12
| |
|