Posted 1/29/2019 08:21 (#7281043 - in reply to #7280626) Subject: RE: Adding clutches/hyd drive to Gen 1 20/20
Franklin NE
You will need RowFlow to do row clutches (harnessing depends on type of clutch). RowFlow also runs hydraulic drive. I would advise to have 3-5 weigh pins which need Rums on those rows with a couple lift switch. You will also need a SeedSence module to monitor seed data. You can use JD or Precision hydraulic drives. JD needs a sensor installed which comes in the harness kit. Hope this helps.
Adding clutches/hyd drive to Gen 1 20/20
