|
NE Iowa | I put John Deere auto steer on my Allis 7060. I bought the ATU200 steering wheel kit used and one of the standard splined bushings fit correctly. The previous owner had it in a 8100 JD and also a 2588 IH combine. I was surprised it fit so easily, so I think the splined column shafts are pretty standard across manufacturers.
And a simple modificion to the anti-rotate bracket and I was in business. A muffler clamp around the column with a bolt welded to it, fits into a slotted hole, so I can still telescope the wheel.
Edit: I also keep some front end weights on and use the diff-lock while auto steering. It's been working great!
Edited by silofarms 1/13/2019 14:20
 (KIMG0037 (full).jpg)
 (KIMG0038 (full).jpg)
 (KIMG0023 (full).jpg)
 (KIMG0027 (full).jpg)
Attachments
----------------
 KIMG0037 (full).jpg (145KB - 90 downloads)
KIMG0038 (full).jpg (132KB - 92 downloads)
KIMG0023 (full).jpg (166KB - 89 downloads)
KIMG0027 (full).jpg (175KB - 82 downloads)
| |
|
EZ Pilot - Older A/C Tractor
