|
| We have a Topcon AGI-4 dome, with a x30 monitor running it right now, in what will be the planter tractor. Our previous planter tractor had a Agleader integra to run everything, as does our Combine. The planter will be run with a Precision Planting 20/20, but we need a way to control liquid fertilizer, without spending 7k on the Vapply system. We were wondering if it is at all possible to use our existing AGI-4 dome, and have it communicate with the Ag Leader integra, to handle autosteer and liquid rate control.
Otherwise, what would it take to remove the Topcon completely, and add an Ag Leader dome and use the integra, or trade up to an In command. The tractor is an Agco DT205b with integrated autosteer. We like the autosteer, but have heard nigthmares about rate control with topcon, and wouldn't mind having everything running with Ag Leader.
Final, slightly related question. Our current planter tractor has ontrac 3. Compared to the integrated Topcon autosteer, it is terrible. Is this caused by the ontrac, or is Agleader's autosteer just not as good? We are hoping hacing the ag leader run integrated steering would take care of the issues we have with the ontrac. Thanks | |
|
Topcon / Agleader Compatibilty
