|
Montgomery City, MO | After putting the 3.05 firmware on my 500 RTK/EZ steer combo the messages that the Insight in my combine used switched from NEMA to TSIP. I have the 500 set to output NMEA on the Aux port, the one I use, but the insight, used for yield monitor only, shows that it is receiving TSIP. I don't get it!!! With the 3.0 firmware the Insight showed NEMA like you would expect. I was wanting to try to use the 500 as a TSIP receiver and an Insight as the "display" on an autopilot but have not got around to try it yet. I don't think it will work. This topic is interesting to me.
Edited by jdj59d 1/31/2009 13:39
| |
|