AgTalk Home
AgTalk Home
Search Forums | Classifieds (105) | Skins | Language
You are logged in as a guest. ( logon | register )

NMEA from FM750 to Green Star Original Display
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
indiana_caseIH
Posted 10/8/2018 08:25 (#7033423)
Subject: NMEA from FM750 to Green Star Original Display


Last week I attempted to export GPS from a Trimble FM750 to Green Star Original Display. I pinned port B of my FM750 for Transmit and signal ground and spliced that wire between the black and blue wire on the mobile mapping processor of the original green star. (pins c and f I believe). Ag Leader had a harness to do this with a GPS1500 so I just used their schematic to make my own harness. I setup the output messages for the 750 for GGA 1 Hz, GSA 1 Hz, and RMC 1 Hz per Ag Leader's instructions. I attempted to use a 4800 and 9600 baud rate configuration; however, I could never get a DGPS fix even though the 750 itself had one. I would have GPS, but not DGPS on the original green star. A message would pop up on the green star saying something like "GPS acquired but no DGPS fix. Maps will be inaccurate." Could anyone shed any light on this situation? TIA
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)