|
Morton | Deere does not import or read the .dat file that is written on the 20/20 monitor. To do this they would need to implement the publicly drivers available under the Drivers section of this page: https://dev.fieldview.com/technical-documentation/
Because FieldView is only storing the .dat file that was written on the 20/20 it wouldn't make a difference if you are exporting the raw files from the 20/20 or downloading from FieldViewPlus.com. It is the same file and it can be read by any third-party program that implements the freely available driver. | |
|
Import as applied map from JD to FieldView
