|
East Central, Nebraska | its using correction data from the beacon only and IS responsible everything else. also digifarm can easily tell you if anything on their side is losing connection or not. you can also log on to portal.godigifarm.com and put in your username and password and that will tell you if it is digifarm, cell provider, or geosteer. low throughput is typically always poor cell connection. constant disconnects with no low throughput is likely geosteer issues. hundreds of users complaining on here that they lost their rtk fix is likely digifarm or solar weather.
best way solution is to take the guessing and finger pointing out of it and check with digifarm. I still side with the fact though that I have not worked with any other brand that more reliant on firmware updates then older agleader gps'. I have seen 10 year old trimble devices work absolutely fine on their original firmware. | |
|
geosteer
