|
NW IL | You are correct, RTK corrections will need to be fed into 6500 via port B. What all will you be running with the 6500?
(1) 20/20
(2) DigiFarm RTK
(3) steering with Ag Leader SteerCommand?
If you have two "non-Ag Leader" applications on 6500 and you need to set up A for 20/20 and B for DigiFarm RTK, I think your next option would be to set up the 6500 using the novatel PC program. You would run the program on a PC and connect your 6500 via a usb to serial adapter. You can access it from one of these two sources:
(1) http://lefebure.com/software/novatelconfig/
(2) Ag Leader has a version available as well. Must be obtained via your local dealer
If you are using SteerCommand, you can also get NMEA strings out of the SteerCommand as well. | |
|
Ag leader 6500 baud rate
