|
NW IL | When you connect 6500 to an Ag Leader display (Integra, Versa, InCommand, Compass) it will auto configure the port that you are connecting to to have a baud rate of 115,000. For say a 20/20, if you connect to Port A with Ag Leader screen, you can configure port B and it will save the port B settings to work with your 20/20. You would then be able to connnect the 20/20 to port B and all the setting should be saved properly.
If for some reason you need to use port A with 20/20, you will have to configure with Ag Leader screen using port B.
Take a look at the following article that discusses this topic:
https://support.agleader.com/kbp/index.php?View=entry&EntryID=1586 | |
|