|
| I am having the same problem as you. I am still unable to get a signal. Greenstar and Agleader people have been unable to help me either. I have a GPS3100 from agleader and have all the correct cables hooked in and I configered the gps to the correct nmea strings that Greenstar requires. This may be your problem, and is worth a try. If you find anything out post it if you would please! Good luck to you. Here is the correct settings according to everyone I have talked to. GSA, GGA and RMC must be turned on, the rest off. The baud rate should be at 4800. Check this out if you can. The tricky part is hooking up your GPS box to a computer or to an agleader PF3000 to make these changes. | |
|
AgLeader GPS 1100 to Greenstar
