Near Intersection of I-35 & I-90 Southern Mn. | Rod Maker - 11/17/2017 20:16
Ted,
Could he not take his existing clutch module and back feed the Raven like an auto mate? Yes it would tak a custom cable but shouldn't be real hard. Correct?
Yes, but as I mention above the logic for a Clutch Control Module output is reversed when compared to a spray or NH3 situation. This means some type of device (relay) would be needed to reverse ON and OFF.
Once again, in a spray or NH3 situation the module needs to output power (or ground) to complete the circuit to get the valve(s) to open. A Clutch Control Module for a planter or drill outputs power (or ground) to complete the circuit to activate a clutch to STOP planting. If a Clutch control module were to be connected to the ON/OFF valve(s) on a sprayer or NH3 bar ON and OFF would be backwards unless some type of reversing relay is utilized. |