AgTalk Home
AgTalk Home
Search Forums | Classifieds (19) | Skins | Language
You are logged in as a guest. ( logon | register )

TMX-2050 WM-Drain with JD external receiver
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 8/1/2017 13:58 (#6161604)
Subject: TMX-2050 WM-Drain with JD external receiver

Fargo, ND
Hi. This always worked with the FMX.
I'm using an external receiver with WM-Drain on a new TMX-2050. Going through EXP-100 port 1 with the serial cable. Inputting NMEA GGA messages at 38.4k baud at 10 Hz. When I go into WM-Drain and attempt to survey the Bench Mark buttons are grayed out. It won't let me benchmark. The GPS button shows GPS configured as Autonomous and the GPS status as Fixed.

Has anyone here used a Deere RTK globe as an external receiver with the TMX-2050? Am I missing something in the setup?

What do I need to be able to do the benchmark and proceed? Thank you

Edited by daveb 8/2/2017 08:16
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)