|
| I was originally going to try an use it to move an hydraulic hopper. Since I found out that the tractor has to be moving in order to have external control it's become more I just want to know.
Heres what I figured out taking apart a cable from a laser control. They had:
A, G, and H tied together
B and H tied together
E, F and K N/C
C control voltage
D connected but doesn't do anything.
So from the pinouts in your post i'm guessing:
5v+ to G and H tells the controller we are using analog not digital joystick
H is grounded as return from their circuitry
Basically A-> C-> H should give me joystick control of #1.
Does this seem right?
Any idea as to what it needs for digital input? | |
|