|
Horsham, Australia | We have a pull type Hardi Commander 8500 (2 years old) with the Hardi branded Agleader display.
Currently in a non iso tractor so we feed nmea gps to the display from a Trimble display. It is a little clunky - Trimble steering tractor and the other swath/section control, spray and height control monitor but works well. No issues with the Agleader display - I like it.
Can or will this work in an ISO Case tractor with the Pro700?
Just need a 2nd tractor option short term - and hoping to do it without moving the field display and wiring across.
Should plug in fine - the Hardi also has a joystick and setbox for boom fold and manual functions (manual rate/sections/master on/off) so they would have to move to the current tractor.
Would need the Task controller unlock for the Pro700 to control boom sections - provided it all works.
Pro700/372 on RTK with ISO software.
Can it be done?
Thanks,
Tristan
Edited by Tristan 7/3/2017 15:46
| |
|