|
France, Champagne | I have found:
To set the NavController to output NMEA messages:
1. At the Autopilot Diagnostics screen, tap Performance under Autopilot.
2. Tap the Advanced tab.
3. In the TAP SETTINGS section, tap in the TAP entry box.
4. Enter how often you want the NMEA message to be output by the NavController and tap GET.
Enter the value in milliseconds. 1000 milliseconds equals 1 Hz.
NMEA Message Message Information
RawNMEAOutputIntervalGGA
RawNMEAOutputIntervalGSA
RawNMEAOutputIntervalGST
RawNMEAOutputIntervalVTG
RawNMEAOutputIntervalZDA
5. To configure the baud rate:
a. Enter “RawNMEAOutputBaudRate” in the TAP entry box, then tap GET.
b. Enter the baud rate that is required by the external device.
c. Tap SET. | |
|