| Andy - 9/18/2006 21:29
Track machines have always seemed to require a bit more attention, espically when retrofitting a plumbed in system. I have never seen an AccuTrac on a 35 Cat, I am not quite sure if it is even a supported platform??
Now that you mention it I haven't seen an E-Drive on a 35 Cat as well, could also quite possibly not be supported.
If BeeLine doesn't offer anything next best bet would be to try and adapt a universal system. I know the JD ATU will work on that particulary tractor, not too sure about the Trimble EZ-Steer. I would try and get a demo of each of the systems for a fair comparison, write back if you do.
The Accutrak system should work fine on the Cat, The hydraulic systems are basically the same as the C and D series tractors and there is a kit available for them. The same kit should work on a 35.
Edited by Sask Farmer 9/20/2006 18:11
|
JD auto Steer Universal
