roaming | 2388farmer - 5/15/2017 05:18
Okay I will give this a try!
Do you have any insights into how the work condition should be set up for VR? We had a Grower who had troubles with his scripts and it dealt with the work condition. Unfortunately he cannot remember how he finally made them work. When you are on the run screen, and you can see where you are travelling should you be able to see the Vr map there to see what zone you are in? If so how do I get the map to show here.
Thanks !
The basic steps are:
1. Set up Products (Toolbox > Product)
2. Assign control channels to Map Layers and assign Products to control channels (Work Condition > Layer)
3. Select the desired Grower, Farm, Field, and Rx for each map layer (Performance > RxSetup)
When you're on a Run screen looking at one of your applied map layers (not the Coverage map or the Fuel Economy map), you can view the Rx in either Color or Outline mode. Color mode will show each rate/zone in a different color, while Outline mode will show only the outlines of each of the zones. Or you can completely hide the Rx on the map (the Rx will still be used by the controller even if the Rx is not shown on the screen, as long as the system is in Automatic mode). |
Reducing number of polygons in SMS for Pro 700
