Tristan - 4/18/2017 22:58
After some testing, I'm thinking it may be desktop software issues.
How the desktop software influences the pass to pass distance I have no idea.
Recorded a new straight line with accuguide and marked vehicle center.
Recorded a new straight line with the 2050 using the marked ground positions.
After many passes both machines hit the same mark.
As a further trial I took the guidance lines currently on the Trimble display and imported them to a blank TABS/Farmworks project - sent them back out in Pro700 form and the issue is the same.
Both start at the same point - but after many passes the accuguide is edging ahead.
I see the latest pro700 software will allow direct transfer of trimble lines - so I might update and eliminate the desktop transfer.