|
Central Illinois | Add. info Receiver is Case-Ih red box by Trimble,part#29654-70 Beacon only I think.Works fine w/Case-IH black box.The TXD is on socket#24,BXD on socket#12,(these go nowhere as far as PF3000 is concerned)Signal ground on socket#4 on the female connector of the 2000931 adapter cable. My uneducated idea is to make a 3 wire pigtail w/a DB9 male end coming off female DB25 end of above cable. Run a new wire from socket #24 to pin #3,new wire from socket #12 to pin #2 & splice an additional wire to socket # 4 and run to pin #5 of a Male DB9 to plug into port 1 of PF3000.Receiver would still be powered thru original harness.Boy am I over my head on this stuff. Clear as mud or am I way off? This would allow easy exchange of the 2 monitors if I trade combines or need PF3000 for other application. TIA steve | |
|
Another AFS change-over ?
