We never had any problems with the autosteer, but we did with the coverage maps for the planter.

We had this happen a few times on the planter. My brother had it happen several times and I only did a couple times. When it happened to us it was when we stopped in the field and backed up to start again, or when we backed into a corner to plant out of it. What I noticed right away was it happens when you only back up a little bit and seem to confuse the display. If you back up at a fairly high rate of speed at least 10', and then make sure it recognizes you are moving again and get the autosteer engaged before putting the planter down, it doesn't do it...at least much anyhow. The only way to get it to quit is to start moving. It will come out of it if you drive straight too, but just make a loop and come back it will come out of it.