|
Sunnyvale, CA | use a 12 volt relay to operate off the sprayer master switch. This is important to avoid feeding voltages directly to the EZ-Guide 500. If you are into doing-it-yourself, connect the Normally Open (NO) contacts on the relay to pins 4 and 5 on the 9-pin connector. If you are using NMEA out on the 9 pin connector or an external keypad you can use cable 52033 or (preferred) 62974 you can get access to these pions 4 and 5 on an easy to use weatherpak 3-pin connector. | |
|