Posted 1/31/2008 13:30 (#297623 - in reply to #296496) Subject: Re: I'm about to purchase EZ-guide 250, need advice
You will need to get the correct EZG250 cable and connect it into the combine harness (CIH's 5 pin flat to DB9 serial connector p/n 87302445). You will then need to make sure the EZG250 is sending the correct NMEA string. The data card on the combine yield monitor can then collect GPS data along with your yield information. You will then need a mapping program to process the data.
I'm about to purchase EZ-guide 250, need advice
