|
North west MN | Yes you can Cut with a 30 foot heat and a 25 foot heat one behind another. I use the EZ-Steer and EZ-Guide by just setting the heading direction the same on each combine with the swath set at 1 foot. Then when operating the combine's with different heads just cut straight up and down make your corner take a full cut and hit the auto Steer button nudge if needed. I have used this method for the last 3 year with 3 combines that have different size heads and it works? If you wanted to go round and round it would not on the ends but would work for straight up the field. You could try going round and round by using the Identical curve setting but then transfer the first Identical curve line set with the first combine to the other 2 combines. I have not tried this as I cut up and down. | |
|