|
| Did you notice they JD has the stuff in a kit if you are going with OEM. Bottom of parts list. All parts with an (A). Parts guy should know ...... but some might not.
Be sure to check for burrs on the shaft where the arm contacts it in the middle. If its a little rough it can be dressed a little with emery cloth or something similar. Most shops will replace shaft rather than risk having to guarantee a job failure but I wouldn't............most of the time.
Used to have a 3010 that we did yearly. It would just be setting in a puddle of oil some morning.
| |
|
Torque bar/ load shaft in JD4255
