SE MN Still in Pothole Country | Help me with my thinking. Yesterday putting new opener disks on planter. One of the gauge wheel tires had a tear in the rubber and a loose bearing so put on a new aftermarket assembley from Abilene. The tire wobbles in and out more than acceptable when you turn it. Should I try loosening the bolts holding the two halves together and try realigning the bearing? I have put in new bearings and do not recall having problems with wobble after re-assembley. My first thought was the gauge wheel arm was bent but on second thought that would reflect alignment with the opener disk but not the tire wobbling in and out. HELP |