|
North Dakota | I bought a new-to-me CaseIH ATX 4010 Air seeder this winter that has a 3380 cart with it. First thing I did was over the winter was put an air seeder hopper on it because I service the cart with hopper trailers. This setup worked great for me in the past with an older ATX 4010 that had the 2300 Air Cart. I'm finding that with this new outifit, there is virtually now way to load this cart with a hopper trailer from the driver side of the trailer. There seems to be almost zero fore/aft movement of the auger for placing under the trailer. The auger setup on this cart seems to be a huge downgrade in my eyes from Concord/CaseIH's older carts. Am I missing something?
Also, I can't see how I can get the auger under the cart for clean-out with air seeder hopper on. I've read alot about guys driving the wheels up on blocks to make it fit. I tried this with some 6x8 blocks and it wasn't even close.
Edited by bincitybandit 4/5/2012 21:56
| |
|