Near Intersection of I-35 & I-90 Southern Mn. | What I would do is have the PF3000 display the elevator speed as one of the four items that you can display on the right. The elevator speed should be quite consistent with a slight reduction for unloading on-the-go or other situations which slow down the engine.
If the elevator speed fluctuates or goes to zero, I would continue to explore the elevator issue. You should be able to move some of the sensors around to see if this has any effect. We have had some customers replace the elevator sensor to improve their situation. These combines were not using EZ-Guide nor EZ-Steer.
I have not heard of your exact problem. Are you sure that the PF3000 works properly when the EZ-Steer is not engaged? Does the problem occur every time you engage the EZ-Steer?
Edited by tedbear 7/4/2007 18:08
|