We only have a hand full of saws - not enough to do you any good. There are supply houses in Texas than sell those for a fraction of the cost they will cost you through traditional OEM parts system - if you need a phone number I'm sure we have some written down in our parts book for suppliers. When you replace them get some screws also. The fine thread screws will sometimes strip out and there are coarse thread self tapping screws to replace them that will cut new threads in a slightly larger hole (from the stripped out fine threads) - you will probably need some of both as the head sometimes rounds on the fine ones even though the threads are still good....... it's like Roseann Roseanna Danna always said, "it's alllllways sumptinn".
John
Edited by John Burns 6/3/2007 12:20
|