|
roaming | The 600 should give alarms if a row is not planting, based on the seed sensor. If you disabled your row alarms so that you wouldn't get nuisance alarms when your row clutches fire, that would explain what you're seeing. Since you're controlling clutches with a separate monitor, the Pro 600 can't know whether the lack of seed at the sensor is a problem (blockage, etc.) or normal operation (clutch shutoff, etc.) If you were controlling clutches through the Pro 600, the display would know when a row clutch is active, and would know not to trigger an alarm under that condition.
The 600 is not designed to be a "status only" monitor, and I'm not aware of any way to trick it into doing this.
Why are you running your drives and clutches via the Integra instead of via the Pro 600? | |
|
Pro600 Missing Alarms on 1250 Planter with Integra?
