|
Sunnyvale, CA | EZ-Steer with T2 units have had performance issues when the input power is not "clean" or there is a brownout caused by losses in the wiring to the cigarette lighter where it was plugged in or when the engine was started after turninig on the EZ-Steer controller. Always start your engine before you turn on the power to the EZ-Steer to avoid that issue. If you do start your engine after applying power to the EZ-Steer, then turn off the EZ-Steer for about 20 seconds and re-apply power. | |
|
Anyone else have trouble with EZ Steer & T2
