|
| If the T2-gyros are installed it is a fact that the motor turns less than without. This is caused of the better position sensing. With T2 you have to recalibrate your system. Try to increase freeplay about twice the value you use without. This will have the biggest effect. Also decrease angle per turn about 2 degrees. If you use then an aggressiveness of 120 % it should work fine and really better than without T2. And as raider said, make sure you mounted the controller solid and in recommended direction.
If you got still problems with performance there should be something wrong.
What happens to a customer of me in the last time is damned T2-fault what has something to to with power supply.
Bruno
Edited by Bruno Koop 4/18/2007 02:31
| |
|
Anyone else have trouble with EZ Steer & T2
