Posted 5/9/2006 11:47 (#10821 - in reply to #10715) Subject: RE: JD 9000 series monitor mounts
Matt, There are several places the monitors could be mounted. We mount the GS monitors like shown here. We had a spray monitor mounted in the 9300 on the screws over the right hand gauge pod right agains the window. Your raven would mount there. You could make some sort of bar that comes from the Right rear post up forward and mount your Flexi-Coil monitor on it as well. Otherwise you could mount the Raven over the top of the 2600 or something.
As for a grain cart scale, we mount that to the left rear corner post in the 8220 because we're looking that way anyhow, and with a 22" auger you need to watch what you are doing and keep good track of how much you are putting on the truck. I don't have any pictures of it, but it sits at a slight angle behind the passeger seat. It works well because we alwasy have the seat swivel unlocked and when you turn a little towards the truck all you have to do is glance down at it.
We have two GS monitors mounted in both our 9300 and 9400. One thing nice about the Deere system is everything ties together nicely. The second monitor is only for turning and lining up on the ends but we had it from the combine anyhow.