|
West Texas | Peanut digger blades all the way to the back concave/cylinder bar in a peanut combine. Had to replace the first 2 sets of concaves and was able to straighten the back one and lots of broken teeth.
Have had a wooden piece of 4x4 stuck in the header auger on an Amadas pull type peanut combine. Was stuck enough we could not beat it out with hammer and crow bars. Ended up raising the auger up and pulling on the block with a piece of chain around it.
Other then that just rock and small stumps on new peanut ground. | |
|
Foreign object vs. Combine (pics)
