|
Central SD | Last spring, I had a Raven Smarttrax system tied into my 2600. As I recall, I had to create AB lines in both systems - the Raven to actually do the steering and the JD as a place to store my AB's. I was also using some AB's created by our other GS2 system. I ditched the idea after I found out that the 2600 did not recognize GPS while receiving Omnistar corrections. Worked good with WAAS, but was pain setting 2 AB lines that didn't always appear to match on my coverage map. If the EZ-Steer functions properly receiving NMEA at 5hz - I would try option 1, but would agree with the above posts, that things are probably not going to work adequately.
Edited by Kamp 3/25/2007 19:11
| |
|
Can a JD receiver feed an Easy steer signal?
