|
| Thanks Ted, it appears I do not need the pressure transducer since it appears that the insight is smart enough to reduce flow when booms sections are shut off. I noted at times when I was running just one section that it appeared to be putting out more than the min flow rate (I'm at 9 gal/min w/current tips). However, I didn't watch the pressure gauge to see if the system compensated and lowered the flow proportionally. I'll have to watch that next time I'm spraying. Pressure gauges are really pretty cheap compared to the sensor - it would be nice not to need it.
Thanks,
Pat
| |
|
Raven pressure sensor
