|
Anamoose, ND | Luke I came across a video on YouTube that mentioned the use of TurboFlood tips for Folicur application. I believe it was from Canada so maybe it is the same research engineer.
Here is the video
http://www.youtube.com/watch?v=W4xACzN8tP8
This sure looks like a simple set up to use. I take it with the TurboFlood nozzle pointed straight up and down you will get a 15 degree spray angle out of the tip. They must spray a very wide pattern since they are usually used on booms with 40 to 60 inch spacing. I assume because of the wide pattern they produce you will still get plenty of overlap when alternating tips facing forward and backwards. I think this could work.
What pressure would you want to run with these for fungicides? I am planning on spraying at 10 mph putting down 15 gallons of water. Thanks for the info.
Edited by CND 6/11/2010 23:30
| |
|