|
Eastern Ontario | I know this has been talked about before. Got my 16 row 3600 going today, the beam is set at 21" and the tongue is raised so the main beam is level, just like you are supposed to. Problem is the parallel links are slanting down alot toward the back of the planter. Looks like the beam should be an inch or so lower to get them running level. Problem is when the outside wheels get on a ridge the centre units are coming off the ground. All the carrying wheels are set in the top hole (second from top on main frame, as per manual). Does this sound right, or is something wrong with my planter. When I push it all the way down all the lift (wing and centre post) cylinders look like they should move another inch or so, but the wing wheel units are hitting on the hard stops. Any suggestions? Thanks.... | |
|
Kinze 3600 beam height
