|
Tuscola, IL | Yes, it worked fine last year when I had the Nav II installed in the combine. The only thing different this year is no Nav II. Dealer tried to trace wiring and couldn't figure out why there was no power. He had a spare serial harness with power plug so we put that in and so far all is fine. If I had a CNH Nav II to try in the combine I would install it and see if we had power then. (My Nav II was reflashed to Trimble software.) I just don't want anymore suprises when I get to the field. The thing that concerns me is that the harness that was hooked up to the reciever and tied into the Accuguide wiring is now hooked to nothing, and didn't know if that would affect any other parts of the yield monitor. There was no warnings coming across the display as it is wired now but I haven't tried it out in the field.
Thanks for your reply
Phil Jacob | |
|