Near Intersection of I-35 & I-90 Southern Mn. | There is one combination of using an old display cable with an adapter and InCommand that can be a problem. My combine was using an old display cable with an Insight. When I moved to an InCommand 1200, I just purchased and used the adapter. This allowed me to leave the old display cable in the combine and just add the adapter when needed. This worked fine.
Later I purchased a Truesight 2 feeler steering controller kit to work with my Ag Leader Steady Steer motor. Since I wished to use the UT of the InCommand 1200 to setup the Truesight 2 instead of a standalone box, I needed a way to connect the Truesight controller to the Ag Leader display cable. My really old Insight display cable did not have that branch.
I suppose there might have been a way to add it but I just bit the bullet and purchased an Ag Leader display cable for an InCommand which has the ISO branch on it. This is the display cable I use on the bench with the adaapter for experimentation since I don't need the ISO branch there. |
In Command to Integra Adapter
