Near Intersection of I-35 & I-90 Southern Mn. | I am not aware of a reverse type adapter. It would seem that one could be created. It might get rather expensive though. Getting the correct reverse sex connectors, plugs and pins might get fairly involved.
I have one of the regular adapters to allow an InCommand to be used with an older display cable. This would allow someone with an older display cable to move up to an InCommand display without removing the cable. This would be the opposite of what you need.
I started with an Insight then a mix with an Integra. Due to trade-up programs, I now have 3 InCommand 1200s and no older Ag Leader displays. I move the InCommands around among 3 tractors, a Hagie sprayer and a combine. Although not absolutely necessary, it is handy to have a display cable in each vehicle that stays with the vehicle. At this time I have no need for the older style display cables but I have some.
Most of my vehicles have the newer style display cables that mate directly with my InCommands. At least one situation has the older style that would mate with an Integra. I need to use the Ag Leader adapter with it.
Actually at the moment I have an older style display cable with an adapter in my basement shop for experimentation. I use a Milwaukee M18 battery and a sleeve that reduces it to 12V with an old style display cable and an adapter to an InCommand for bench testing.
In other words I have a display cable or two that would work for you. Your newer display cable should work for me. Neither of us would need an adapter then. Since I don't plan on ever going back to a situation where I would need the old style cable this might simplify things.
Maybe its not worth the effort to swap them.
Edited by tedbear 2/3/2025 10:55
|