|
Dix (Boyd), IL | I'm moving my ATU and GS2 from a tractor to our 9760. I can't find the terminator and 2/4 plugs above the visor (they may be tucked up there somewhere). So I just T-ed the ATU harness (thin one that plugs into the ATU) into the display plug. My combine harness has the 2 plugs for a GS1 and processor, so I plugged into that cable, then plugged in a GS1 to GS2 adaptor, then into my GS2 display.
Now I pulled the combine out of the shop and tried it. The ATU works, but it did not recognize the seat switch. Is this because I did not tie into the greenstar ready harness at the terminator?
Also, I've never used the GS2 for harvest before, just the brown box. Will I be able to see harvest info on the GS2 homepages, or will it only show this in the original display emulation?
Thanks for any input, and go ahead and assume that I don't know much. It won't insult me cause I want to learn. | |
|
ATU in 9760
