Oldiskool - 3/31/2024 14:59
Trying to increase the height of a vertical unload. Looking for the angle iron that's a circle plus a couple feet of pipe.
I'd need 3 pieces of angle and minimum 2ft of pipe.
It's a Sudenga 8" horizontal to 10" vertical.
Their website and dealers in Minnesota are terrible with customer service.
Sudenga sells parts directly to farmers and the parts guy I dealt with at Sudenga was pretty good. Might be worth it to call sudenga directly and ask for their parts department. | 
10" angle iron that's circular for an unload.
