|
Faunsdale, AL | Look under any welded on tag expecting severe corrosion to tank steel. May not be perforated yet, but it could be.
Then factor in hoses, tubes, metering regulator calibration, new relief valves, valve packings needing replaced etc.
Might be preferable to have a neighbor custom apply it.
Couple years ago I got my 9 shank John Blue applicator and tanks back in shape and it was costly! I had a recalibrated “nitrolator” on the shelf, but it wouldn’t open up, so had to swap the solenoid parts from another one. Turns out they calibrate them with water and it had been sealed up with some water still in it and been sitting for 10 years…….Urg! If it had been used, at least there wouldn’t have been any water in it.
Start early getting everything you might need. | |
|
Old style nh3 side dress
