|
Pacific Northwest | Here is a thread detailing the settings you need to have in the 6000 to get it to work with the Insight. You may need another display for the initial configuration.
https://talk.newagtalk.com/forums/thread-view.asp?tid=552650&Display...
Another thing to look at: since this is new to you, and you're using it as a yield monitor, I assume you are not using auto steering? If you are not auto steering, but it is configured to use steering, it will be looking to the (non-existent) steering controller for it's GPS signal. If you are using steering, but it is configured to manual, then it will be looking straight to the receiver instead of the steering box, which also will not work. Tl:dr, make sure that your steering configuration matches your real setup, be that automatic or manual. | |
|