|
Coles County, Illinois | I've been following this as I've a similar issue on two different units. For some reason the accuracy indicator on my Envizio Pro II's doesn't change between WAAS and RTK. I went into the health screen and it sees the different Modes my U-Blox receiver but it doesn't change the Icon. I've caught it dropping down to mode 2 (WAAS) and a couple seconds later going back to mode 4 (RTK lock) it never goes to mode 5 (RTK float) and it always says 12 satellites. I think my cell phone data provider is dropping my feed during high demand periods as my signal strength is 4 bars. Pandora doesn't drop out but I think the App caches the data deeper than my RTK client.
I plan to disable WAAS mode that way when RTK drops out my icon will go to yellow as I'll be in Mode 1 and my steering will drop out and beep. If you have an AG Leader receiver I think you may be able to enable "Steady Steer" this should allow a slow transition from WAAS to RTK and back again.
Edited by Herbie56 6/30/2022 19:05
| |
|